STEERING GEAR > INSTALLATION |
| 1. INSTALL TIE ROD ASSEMBLY LH |
![]() |
Install the lock nut and tie rod assembly LH to the steering rack end sub-assembly until the matchmarks are aligned.
| *a | Matchmark |
| 2. INSTALL TIE ROD ASSEMBLY RH |
| 3. INSTALL STEERING LINK ASSEMBLY |
Install the steering link assembly with the 2 bolts and 2 nuts.
| 4. INSTALL FRONT STABILIZER BAR |
Install the front stabilizer bar to the front frame assembly.
| 5. INSTALL NO. 1 FRONT STABILIZER BRACKET LH |
Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.
| 6. INSTALL NO. 1 FRONT STABILIZER BRACKET RH |
| 7. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE |
| 8. CONNECT TIE ROD ASSEMBLY LH |
Connect the tie rod assembly LH to the steering knuckle with the nut.
Install a new cotter pin.
| 9. CONNECT TIE ROD ASSEMBLY RH |
| 10. CONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY |
![]() |
Align the matchmarks and install the steering intermediate shaft to the steering link assembly.
| *a | Matchmark |
Install the bolt.
| 11. INSTALL FRONT WHEELS |
| 12. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |
| 13. INSPECT STEERING WHEEL CENTER POINT |