STEREO JACK ADAPTER ASSEMBLY > REMOVAL |
| 1. REMOVE FRONT PANEL GARNISH LH |
![]() |
Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.
| 2. REMOVE FRONT PANEL GARNISH RH |
![]() |
Disengage the 3 clips and 8 guides to remove the front panel garnish RH as shown in the illustration.
| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.
| 4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Move the shift lever to N.
Disengage the 6 clips as shown in the illustration.

Disconnect each connector to remove the rear console upper panel sub-assembly.
| 5. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
![]() |
Disengage the 4 clips and 2 guides as shown in the illustration.
![]() |
Disengage the clamp.
Disconnect the 2 connectors to remove the upper console box sub-assembly.
| 6. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY |
![]() |
Disengage the 2 claws to remove the No. 1 stereo jack adapter assembly.