SLIDING ROOF SYSTEM > INITIALIZATION |
| INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) |
Perform initialization according to the table below.
| Condition of Sliding Roof | Proceed to |
| Auto slide open and close/tilt up and down functions do not operate. | Procedure A |
| Automatically moves, but the sliding roof glass does not stop at the correct position (misalignment occurs), or the sliding roof glass moves in the reverse direction during tilt down operation. | Procedure B |
| Automatically moves, but the sliding roof glass moves in the reverse direction during slide close operation. | Procedure C |
Procedure A
Procedure B
Procedure C