Home › Vehicle Interior › LIGHTING (INT) › DOOR COURTESY LIGHT

DOOR COURTESY LIGHT > INSPECTION

for Preparation Click here



1. INSPECT COURTESY LIGHT ASSEMBLY LH


    E136359E19
  1. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

  1. Check that the courtesy light comes on.

    OK:
    Courtesy light comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (Courtesy Light Assembly LH)
    If the result is not as specified, replace the bulb or courtesy light assembly LH.



2. INSPECT COURTESY LIGHT ASSEMBLY RH


    E136359E19
  1. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

  1. Check that the courtesy light comes on.

    OK:
    Courtesy light comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (Courtesy Light Assembly RH)
    If the result is not as specified, replace the bulb or courtesy light assembly RH.