LUGGAGE COMPARTMENT DOOR LOCK > INSPECTION |
| 1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY |
Check the operation of the door lock motor.
![]() |
Move the door lock to the close (lock) position.
Apply auxiliary battery voltage to the door lock motor and check operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Auxiliary battery positive (+) → 1 (B) Auxiliary battery negative (-) → 2 (E) | Luggage compartment door lock motor open (unlock) operation |
| *a | Component without harness connected: (Luggage Compartment Door Lock Assembly) |
| *b | Close (Lock) |
| *c | Open (Unlock) |
Check the operation of the door courtesy switch.
![]() |
Measure the resistance according to the value(s) in the table below.
| Measurement Condition | Door Lock Condition | Specified Condition |
| 2 (E) - 3 (D+) | Close (Lock) | 10 kΩ or higher |
| 2 (E) - 3 (D+) | Open (Unlock) | Below 1 Ω |
| *a | Component without harness connected: (Luggage Compartment Door Lock Assembly) |
| *b | Close (Lock) |
| *c | Open (Unlock) |