REAR SEAT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE REAR SEAT SHOULDER BELT GUIDE LH |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH.
| 2. REMOVE REAR SEAT SHOULDER BELT GUIDE RH |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide RH.
| 3. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side) |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat center shoulder belt guide.
| 4. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for LH Side) |
![]() |
Disengage the 4 claws and remove the rear seatback upper lock bezel.
| 5. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side) |
![]() |
Disengage the 2 hooks.
![]() |
Remove the 6 hog rings.
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
| 6. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side) |
![]() |
Remove the 6 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
| 7. REMOVE NO. 1 SEAT ARMREST CAP (for RH Side) |
![]() |
Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws and remove the No. 1 seat armrest cap.
| *a | Protective Tape |
| 8. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side) |
![]() |
Remove the bolt and washer.
Disengage the guide and remove the rear seat center armrest assembly.
![]() |
Disengage the 2 claws and remove the bush.
| 9. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side) |
![]() |
Disengage the 2 claws and 2 guides as indicated by the arrows, in the order shown in the illustration to remove the rear seat center armrest cup holder sub-assembly.
| 10. REMOVE REAR SEATBACK HINGE COVER (for RH Side) |
![]() |
Remove the rear seatback hinge cover as shown in the illustration.
| 11. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for RH Side) |
![]() |
Disengage the 4 claws and remove the rear seatback upper lock bezel.
| 12. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side) |
![]() |
Disengage the 2 hooks.
![]() |
Remove the 7 hog rings.
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.
| 13. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side) |
![]() |
Remove the 7 hog rings.
![]() |
Remove the 8 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
| 14. REMOVE BENCH TYPE REAR SEAT CUSHION COVER |
Remove the 46 hog rings.

Remove the 24 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.
