REAR SEAT ASSEMBLY > REASSEMBLY |
| 1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER |
Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.
Using hog ring pliers, install 24 new hog rings.

Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 46 new hog rings.

| 2. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side) |
![]() |
Using hog ring pliers, install the separate type rear seatback cover with 6 new hog rings.
| 3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side) |
Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.
![]() |
Engage the 4 claws to install the 2 rear seat headrest supports.
![]() |
Engage the 2 hooks.
![]() |
Using hog ring pliers, install 6 new hog rings.
![]() |
Engage the 2 hooks to install the separate type rear seatback cover with pad.
| 4. INSTALL REAR SEATBACK UPPER LOCK BEZEL (for LH Side) |
![]() |
Engage the 4 claws to install the rear seatback upper lock bezel.
| 5. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side) |
![]() |
Engage the guide to install the rear seat center shoulder belt guide.
Install the 2 screws.
| 6. INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side) |
![]() |
Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 8 new hog rings.
![]() |
Using hog ring pliers, install 7 new hog rings.
| 7. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side) |
Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.
![]() |
Engage the 4 claws to install the 2 front seat headrest supports.
![]() |
Engage the 2 hooks.
![]() |
Using hog ring pliers, install the rear separate type seatback cover with pad to the seatback frame sub-assembly with 7 new hog rings.
![]() |
Engage the 2 hooks to install the separate type rear seatback cover with pad.
| 8. INSTALL REAR SEATBACK UPPER LOCK BEZEL (for RH Side) |
![]() |
Engage the 4 claws to install the rear seatback upper lock bezel.
| 9. INSTALL REAR SEATBACK HINGE COVER (for RH Side) |
![]() |
Install the rear seatback hinge cover as shown in the illustration.
| 10. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side) |
![]() |
Engage the 2 claws and 2 guides as indicated by the arrows, in the order shown in the illustration to install the rear seat center armrest cup holder sub-assembly.
| 11. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side) |
![]() |
Engage the 2 claws to install the bush.
![]() |
Engage the guide.
Install the rear seat center armrest assembly with the washer and bolt.
| 12. INSTALL NO. 1 SEAT ARMREST CAP (for RH Side) |
![]() |
Engage the 3 claws to install the No. 1 seat armrest cap.
| 13. INSTALL REAR SEAT SHOULDER BELT GUIDE LH |
![]() |
Engage the guide to install the rear seat shoulder belt guide LH.
Install the 2 screws.
| 14. INSTALL REAR SEAT SHOULDER BELT GUIDE RH |
![]() |
Engage the guide to install the rear seat shoulder belt guide RH.
Install the 2 screws.