Home › Vehicle Interior › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT SWITCH (for Driver)


    B283634E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD
    *1
    Front Vertical Switch
    *2
    Slide Switch
    *3
    Lifter Switch
    *4
    Reclining Switch
    *a
    Component without harness connected
    (Front Power Seat Switch (for Driver))

    Standard Resistance (for LHD):
    Slide Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    5 - 7
    5 - 8
    Front
    Below 1 Ω
    2 - 11
    2 - 12
    5 - 11
    5 - 12
    Off
    2 - 11
    2 - 12
    5 - 11
    5 - 12
    Rear
    2 - 7
    2 - 8
    Front Vertical Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 7
    1 - 8
    Up
    Below 1 Ω
    6 - 11
    6 - 12
    1 - 11
    1 - 12
    Off
    6 - 11
    6 - 12
    1 - 11
    1 - 12
    Down
    6 - 7
    6 - 8
    Lifter Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    3 - 7
    3 - 8
    Up
    Below 1 Ω
    4 - 11
    4 - 12
    3 - 11
    3 - 12
    Off
    4 - 11
    4 - 12
    3 - 11
    3 - 12
    Down
    4 - 7
    4 - 8
    Reclining Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    10 - 7
    10 - 8
    Front
    Below 1 Ω
    9 - 11
    9 - 12
    10 - 11
    10 - 12
    Off
    9 - 11
    9 - 12
    10 - 11
    10 - 12
    Rear
    9 - 7
    9 - 8


    Standard Resistance (for RHD):
    Slide Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    2 - 13
    2 - 14
    Front
    Below 1 Ω
    5 - 9
    5 - 10
    2 - 9
    2 - 10
    Off
    5 - 9
    5 - 10
    2 - 9
    2 - 10
    Rear
    5 - 13
    5 - 14
    Front Vertical Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    6 - 13
    6 - 14
    Front
    Below 1 Ω
    1 - 9
    1 - 10
    6 - 9
    6 - 10
    Off
    1 - 9
    1 - 10
    6 - 9
    6 - 10
    Rear
    1 - 13
    1 - 14
    Lifter Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    4 - 13
    4 - 14
    Front
    Below 1 Ω
    3 - 9
    3 - 10
    4 - 9
    4 - 10
    Off
    3 - 9
    3 - 10
    4 - 9
    4 - 10
    Rear
    3 - 13
    3 - 14
    Reclining Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    11 - 13
    11 - 14
    Front
    Below 1 Ω
    12 - 9
    12 - 10
    11 - 9
    11 - 10
    Off
    12 - 9
    12 - 10
    11 - 9
    11 - 10
    Rear
    12 - 13
    12 - 14

    If the result is not as specified, replace the front power seat switch (for Driver).



2. INSPECT FRONT POWER SEAT SWITCH (for Front Passenger)


B283635E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD
    *1
    Slide Switch
    *2
    Reclining Switch
    *a
    Component without harness connected
    (Front Power Seat Switch (for Front Passenger))

    Standard Resistance (for LHD):
    Slide Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    2 - 13
    Front
    Below 1 Ω
    5 - 10
    2 - 10
    Off
    5 - 10
    2 - 10
    Rear
    5 - 13
    Reclining Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    11 - 13
    Front
    Below 1 Ω
    12 - 10
    11 - 10
    Off
    12 - 10
    11 - 10
    Rear
    12 - 13


    Standard Resistance (for RHD):
    Slide Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    5 - 8
    Front
    Below 1 Ω
    2 - 11
    5 - 11
    Off
    2 - 11
    5 - 11
    Rear
    2 - 8
    Reclining Switch 
    Tester Connection
    Switch Condition
    Specified Condition
    10 - 8
    Front
    Below 1 Ω
    9 - 11
    10 - 11
    Off
    9 - 11
    10 - 11
    Rear
    9 - 8

    If the result is not as specified, replace the front power seat switch (for Front Passenger).