CIGARETTE LIGHTER > INSTALLATION |
| 1. INSTALL CIGARETTE LIGHTER ASSEMBLY |
![]() |
Install the cigarette lighter socket and cigarette lighter retainer.
![]() |
Turn the cigarette lighter nut in the direction indicated by the arrow to install it.
Connect the connector.
Engage the clamp.
![]() |
Install the cigarette lighter knob and element assembly.
| 2. INSTALL FRONT ASH RECEPTACLE ASSEMBLY |
Connect each connector.
![]() |
Engage the 2 clips.
Install the front ash receptacle assembly with the 2 screws <C>.
| 3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH |
Connect each connector.
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
| 4. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the 6 clips to install the rear console upper panel sub-assembly.
Move the shift lever to P.
| 5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install it.
![]() |
Engage the 2 claws to connect the shift hole cover sub-assembly as shown in the illustration.
| 6. INSTALL FRONT PANEL GARNISH RH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.
| 7. INSTALL FRONT PANEL GARNISH LH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish LH.