AIR CONDITIONING SYSTEM > TERMINALS OF ECU |
| AIR CONDITIONING AMPLIFIER ASSEMBLY |

| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| I77-1 (IG+) - I77-14 (GND) | B - W-B | Power source (IG) | Power switch on (IG) | 11 to 14 V |
| I77-1 (IG+) - I77-14 (GND) | B - W-B | Power source (IG) | Power switch off | Below 1 V |
| I77-4 (ECOS) - I77-14 (GND) | L - W-B | ECO mode switch (eco switch assembly) signal | Power switch on (IG) ECO mode switch (eco switch assembly): on | Below 1 V |
| I77-4 (ECOS) - I77-14 (GND) | L - W-B | ECO mode switch (eco switch assembly) signal | Power switch on (IG) ECO mode switch (eco switch assembly): off | 11 to 14 V |
| I77-5 (TAM) - I77-13 (SG-2) | P - GR | Ambient temperature sensor signal | Power switch on (IG) Ambient temperature: 25°C (77°F) | 1.35 to 1.75 V |
| I77-5 (TAM) - I77-13 (SG-2) | P - GR | Ambient temperature sensor signal | Power switch on (IG) Ambient temperature: 40°C (104°F) | 0.9 to 1.2 V |
| I77-9 (PRE) - I77-13 (SG-2) | R - GR | Air conditioning pressure sensor signal | Power switch on (READY) A/C system operating Refrigerant pressure: Abnormal pressure (more than 3025 kPa (30.9 kgf/cm2, 439 psi)) | 4.80 V or higher |
| I77-9 (PRE) - I77-13 (SG-2) | R - GR | Air conditioning pressure sensor signal | Power switch on (READY) A/C system operating Refrigerant pressure: Abnormal pressure (less than 176 kPa (1.8 kgf/cm2, 25 psi)) | Below 0.50 V |
| I77-9 (PRE) - I77-13 (SG-2) | R - GR | Air conditioning pressure sensor signal | Power switch on (READY) A/C system operating Refrigerant pressure: Normal pressure (less than 3025 kPa (30.9 kgf/cm2, 439 psi) and more than 176 kPa (1.8 kgf/cm2, 25 psi)) | 0.50 to 4.80 V |
| I77-10 (S5-3) - I77-13 (SG-2) | V - GR | Power supply for air conditioning pressure sensor | Power switch on (IG) A/C switch: on | 4.75 to 5.25 V |
| I77-10 (S5-3) - I77-13 (SG-2) | V - GR | Power supply for air conditioning pressure sensor | Power switch on (IG) A/C switch: off | Below 1 V |
| I77-11 (CANH) - I77-12 (CANL) | V - W | CAN communication system | CAN communication occurring | Pulse generation |
| I77-13 (SG-2) - Body ground | GR - Body ground | Ground for air conditioning pressure sensor, ambient temperature sensor | Always | Below 1 V |
| I77-14 (GND) - Body ground | W-B - Body ground | Ground for main power supply | Always | Below 1 V |
| I77-15 (PTC1) - Body ground | G - Body ground | Quick heater operation signal |
| 11 to 14 V |
| I77-16 (PTC2) - Body ground | Y - Body ground*1 L - Body ground*2 | Quick heater operation signal |
| 11 to 14 V |
| I77-21 (B) - I77-14 (GND) | Y - W-B | Power source (Back-up) | Power switch off | 11 to 14 V |
| I77-22 (BLW) - I77-14 (GND) | R - W-B | Blower motor speed control signal | Power switch on (IG) Blower switch: LO | Pulse generation (See waveform 1) |
| I77-26 (NAIN) - I77-14 (GND) | Y - W-B | Ion generator operation condition signal | Power switch on (IG) Blower switch: LO | Below 1 V |
| I77-26 (NAIN) - I77-14 (GND) | Y - W-B | Ion generator operation condition signal | Power switch on (IG) Blower switch: OFF | 11 to 14 V |
| I77-27 (IDH) - I77-14 (GND) | SB - W-B | Inverter with converter assembly current over signal | Power switch on (IG) | 4.75 to 5.25 V |
| I77-29 (TR) - I77-34 (SG-1) | P - LG | Room temperature sensor signal | Power switch on (IG) Cabin temperature: 25°C (77°F) | 1.8 to 2.2 V |
| I77-29 (TR) - I77-34 (SG-1) | P - LG | Room temperature sensor signal | Power switch on (IG) Cabin temperature: 40°C (104°F) | 1.2 to 1.6 V |
| I77-32 (TSP) - I77-14 (GND) | R - W-B*1 Y - W-B*2 | Solar sensor signal (for Front passenger side) | Power switch on (IG) Solar sensor subjected to electric light | 0.8 to 4.3 V |
| I77-32 (TSP) - I77-14 (GND) | R - W-B*1 Y - W-B*2 | Solar sensor signal (for Front passenger side) | Power switch on (IG) Solar sensor covered with a cloth | Below 0.8 V |
| I77-33 (TSD) - I77-14 (GND) | Y - W-B*1 R - W-B*2 | Solar sensor signal (for Driver side) | Power switch on (IG) Solar sensor subjected to electric light | 0.8 to 4.3 V |
| I77-33 (TSD) - I77-14 (GND) | Y - W-B*1 R - W-B*2 | Solar sensor signal (for Driver side) | Power switch on (IG) Solar sensor covered with a cloth | Below 0.8 V |
| I77-34 (SG-1) - Body ground | LG - Body ground | Ground for room temperature sensor | Always | Below 1 V |
| I77-37 (LIN1) - I77-14 (GND) | V - W-B | LIN communication signal | Power switch on (IG) | Pulse generation |
| I77-39 (NANO) - I77-14 (GND) | R - W-B | Ion generator operation signal | Power switch on (IG) Blower switch: LO | Below 1 V |
| I77-39 (NANO) - I77-14 (GND) | R - W-B | Ion generator operation signal | Power switch on (IG) Blower switch: OFF | 4.75 to 5.25 V |
| z1-2 (BUS G) - Body ground | - | Ground for BUS IC | Always | Below 1 V |
| z1-3 (BUS) - z1-2 (BUS G) | - | BUS IC control signal | Power switch on (IG) | Pulse generation |
| z1-4 (B BUS) - z1-2 (BUS G) | - | Power supply for BUS IC | Power switch off | 11 to 14 V |
| z1-5 (SGA) - Body ground | - | Ground for evaporator temperature sensor | Always | Below 1 V |
| z1-6 (TEA) - z1-5 (SGA) | - | Evaporator temperature sensor signal | Power switch on (IG) Evaporator temperature: 0°C (32°F) | 1.7 to 2.1 V |
| z1-6 (TEA) - z1-5 (SGA) | - | Evaporator temperature sensor signal | Power switch on (IG) Evaporator temperature: 15°C (59°F) | 0.9 to 1.3 V |
![]() |
Waveform 1:
| Item | Content |
| Terminal No. | I77-22 (BLW) - I77-14 (GND) |
| Tool Setting | 1 V/DIV., 500 μs/DIV. |
| Vehicle Condition | Power switch on (IG) Blower switch: LO |
| POWER MANAGEMENT CONTROL ECU (Click here) |
| INVERTER WITH CONVERTER ASSEMBLY (Click here) |
| AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD) |

| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| I56-2 (IG+) - I56-6 (GND) | R - W-B | Power source (IG) | Power switch off | Below 1 V |
| I56-2 (IG+) - I56-6 (GND) | R - W-B | Power source (IG) | Power switch on (IG) | 11 to 14 V |
| I56-6 (GND) - Body ground | W-B - Body ground | Ground for air conditioning panel (heater control switch board) | Always | Below 1 V |
| I56-9 (LIN1) - Body ground | V - Body ground | LIN communication signal | Power switch on (IG) | Pulse generation |
| I56-11 (ILL+) - I56-15 (ILL-) | G - W-B | Light control switch signal | Light control switch off | Below 1 V |
| I56-11 (ILL+) - I56-15 (ILL-) | G - W-B | Light control switch signal | Light control switch tail or head position | 11 to 14 V |
| I56-15 (ILL-) - Body ground | W-B - Body ground | Ground for air conditioning panel (heater control switch board) illumination | Always | Below 1 V |