Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING AMPLIFIER

AIR CONDITIONING AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
  1. Engage the 2 guides.

  1. Install the air conditioning amplifier assembly with the 2 screws.

  1. Connect each connector.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B281770
  1. Engage the 2 clips and 4 guides.

  1. Install the 3 screws <C>.

  1. Close the lower instrument panel door.

  1. Install the lower instrument panel sub-assembly with the bolt <B> and screw <C>.



3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Connect the connector.

  1. Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.



4. INSTALL FRONT PANEL GARNISH

HINT:
Use the same procedure for the RH side and LH side .



5. INSTALL INSTRUMENT SIDE PANEL

HINT:
Use the same procedure for the RH side and LH side .



6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD: .
for RHD:


7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY

HINT:
Use the same procedure for the RH side and LH side .



8. INSTALL FRONT DOOR SCUFF PLATE

HINT:
Use the same procedure for the RH side and LH side .



9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


10. INSTALL LUGGAGE TRIM SERVICE HOLE COVER
  1. Engage the claw to connect the luggage trim service hole cover.