Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR DUCT SUB-ASSEMBLY


    E228084
  1. Disengage the 4 claws and remove the air duct sub-assembly.



2. REMOVE AIR FILTER COVER PLATE


    E226843
  1. Disengage the 2 claws and remove the air filter cover plate.



3. REMOVE CLEAN AIR FILTER


    E231952
  1. Remove the clean air filter as shown in the illustration.



4. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    E226842
  1. Remove the 3 screws and No. 1 blower damper servo sub-assembly.



5. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    E228085
  1. Remove the 3 screws and blower motor with fan sub-assembly.