Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
  1. Install the blower motor with fan sub-assembly with the 3 screws.



2. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
  1. Install the No. 1 blower damper servo sub-assembly with the 3 screws.



3. INSTALL CLEAN AIR FILTER


    E236498
  1. Install the clean air filter as shown in the illustration.



4. INSTALL AIR FILTER COVER PLATE
  1. Engage the 2 claws to install the air filter cover plate.



5. INSTALL AIR DUCT SUB-ASSEMBLY
  1. Engage the 4 claws to install the air duct sub-assembly.