POWER WINDOW MASTER SWITCH > REMOVAL |
| 1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL |
![]() |
Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.
Disconnect each connector and remove the multiplex network master switch assembly with front door armrest base panel.
| 2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY |
![]() |
Remove the 3 screws and multiplex network master switch assembly from the front upper armrest base panel.