FRONT PASSENGER SIDE POWER WINDOW SWITCH > REMOVAL |
| 1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL |
![]() |
Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.
Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.
| 2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
![]() |
Disengage the 2 claws and remove the power window regulator switch assembly from the front upper armrest base panel.