Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



OVERALL CAN BUS DIAGRAM


  1. The CAN communication system is composed of 2 buses.


    C273079E01


    Text in Illustration 
    *1
    V Bus
    *2
    Sub Bus 15
    *3
    V Bus Terminating Resistor
    *4
    Sub Bus 15 Terminating Resistor
    *5
    ECM
    (for V Bus and Sub Bus 15)
    *6
    Steering Sensor
    (for V Bus)
    *7
    Clearance Warning ECU Assembly
    (for V Bus)
    *8
    DLC3
    (for V Bus)
    *9
    Power Management Control ECU
    (for V Bus and Sub Bus 15)
    *10
    Smart Key ECU Assembly (Certification ECU)
    (for V Bus)
    *11
    Airbag Sensor Assembly
    (for V Bus)
    *12
    Air Conditioning Amplifier Assembly
    (for V Bus)
    *13
    Power Steering ECU Assembly
    (for V Bus)
    *14
    Radio and Display Receiver Assembly
    (for V Bus)
    *15
    Brake Booster with Master Cylinder Assembly (Skid Control ECU)
    (for V Bus and Sub Bus 15)
    *16
    Main Body ECU (Multiplex Network Body ECU)
    (for V Bus)
    *17
    Combination Meter Assembly
    (for V Bus)
    -
    -

    HINT:
    Refer to the following bus wiring diagrams for details.


V BUS (for LHD)

C188419E01


C188422E01

HINT:
The CAN communication system connects to other networks via ECUs that function as a gateway (Click here).


V BUS (for RHD)

C249905E06


C188420E01

HINT:
The CAN communication system connects to other network via ECUs that function as a gateway (Click here).


SUB BUS 15

C188421E01