Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL

AIR CONDITIONING PANEL > DISASSEMBLY

for Preparation Click here



1. REMOVE HEATER CONTROL SWITCH BOARD

NOTICE:
When disassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.



    E301555
  1. Remove the 4 screws.

  1. Disengage the 5 claws and remove the heater control retainer RH from the heater control housing sub-assembly.



    E301556
  1. Disengage the claw to remove the heater control switch board from the heater control housing sub-assembly.

    NOTICE:
    Make sure the hazard switch is off before removing the heater control switch board to prevent the heater control switch board and heater control housing sub-assembly from being damaged.