Home › General › SPECIFICATIONS › ALIGNMENT / HANDLING DIAGNOSIS

ALIGNMENT / HANDLING DIAGNOSIS > SERVICE DATA



Vehicle Height (Unloaded Vehicle):

Front A - B
Rear C - D
114 mm (4.49 in.)
45 mm (1.77 in.)

Measurement points:
  1. A: Ground clearance of front wheel center
  1. B: Ground clearance of lower No. 2 suspension arm bushing set bolt center
  1. C: Ground clearance of rear wheel center
  1. D: Ground clearance of strut rod set bolt center

Camber (Unloaded Vehicle):

-
Camber Inclination
Right-left Difference
Front
-0°35' +/- 45' (-0.58° +/- 0.75°)
45' (0.75°) or less
Rear
-1°11' +/- 45' (-1.18° +/- 0.75°)
45' (0.75°) or less


Caster (Unloaded Vehicle):

Caster Inclination
Right-left Difference
2°55' +/- 45' (2.92° +/- 0.75°)
45' (0.75°) or less


Steering Axis Inclination (Unloaded Vehicle):

Steering Axis Inclination
12°00' (12.00°)


Toe-in (Unloaded Vehicle):

-
Specified Condition
Front
C + D: 0°00' +/- 0°11' (0.00° +/- 0.18°)
B - A: 0 +/- 2.0 mm (0 +/- 0.0787 in.)
Rear
C + D: 0°22' +/- 0°11' (0.37° +/- 0.18°)
B - A: 4.0 +/- 2.0 mm (0.157 +/- 0.0787 in.)


Wheel Turning Angle (Unloaded Vehicle):

Inside Wheel
Outside Wheel
38°56' +/- 2°(38.93° +/- 2°)
33°58' +/- 2°(33.97° +/- 2°)