STEERING WHEEL > REMOVAL |
| 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD |
| 2. REMOVE HORN BUTTON ASSEMBLY |
| 3. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the steering wheel assembly set nut.
| *a | Matchmark |
Put matchmarks on the steering wheel assembly and steering main shaft.
Disconnect the connectors from the spiral cable sub-assembly.
![]() |
Using SST, remove the steering wheel assembly.
| *a | Turn |
| *b | Hold |
| 4. REMOVE STEERING PAD SWITCH ASSEMBLY |
Disconnect the steering pad switch connector from the spiral cable sub-assembly.
![]() |
Disengage the clamp.
![]() |
Remove the 2 screws.
| *1 | Pin |
| *2 | Guide |
Disengage the 2 claws, 2 pins and 2 guides to remove the steering pad switch assembly.
| 5. REMOVE CRUISE CONTROL MAIN SWITCH |
![]() |
Remove the 2 screws.
![]() |
Disconnect the connector and remove the cruise control main switch.
| 6. REMOVE CRUISE CONTROL SWITCH WIRE |
Remove the cruise control switch wire.
| 7. REMOVE STEERING SHAKE DAMPER |
![]() |
Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.