Home › Steering › STEERING COLUMN › STEERING PAD SWITCH

STEERING PAD SWITCH > REMOVAL

for Preparation Click here



1. REMOVE HORN BUTTON ASSEMBLY
(Click here)


2. REMOVE STEERING PAD SWITCH ASSEMBLY
  1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.



    C281802
  1. Disengage the clamp.



    C281843E01
  1. Remove the 2 screws.
    Text in Illustration 
    *1
    Pin
    *2
    Guide

  1. Disengage the 2 claws, 2 pins and 2 guides to remove the steering pad switch assembly.