FRONT SPEED SENSOR > INSTALLATION |
| 1. INSTALL FRONT SPEED SENSOR |
Install the front speed sensor to the steering knuckle with the bolt.
![]() |
Install the front speed sensor clamp and front flexible hose to the shock absorber bracket with the bolt.
| *1 | Front Speed Sensor Clamp |
| *2 | Front Flexible Hose |
| *a | Claw |
Engage the clamp to the front shock absorber.
![]() |
Install the speed sensor clamp to the body with the bolt.
| *a | Claw |
Engage the clamp and connect the connector.
| 2. INSTALL FRONT FENDER LINER |
| 3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL |
| 4. CHECK FOR SPEED SENSOR SIGNAL |