Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > INSTALLATION

for Preparation Click here



1. INSTALL REAR BUMPER ASSEMBLY
  1. w/ TOYOTA Parking Assist-sensor System:

    1. Connect the connector.



    B282089
  1. Engage the 6 claws.



    B282087
  1. Engage the 7 claws and install the rear bumper assembly as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.



    B280040
  1. Install the 2 screws.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Install the 6 screws.

  1. Install the 4 clips.



2. INSTALL REAR BUMPER PLATE LH


    B282085E01
  1. Engage the hook.
    Text in Illustration 
    *1
    Hook

  1. Engage the 2 claws to install the rear bumper plate LH.



3. INSTALL REAR BUMPER PLATE RH

HINT:
Use the same procedure as for the LH side.