NAME PLATE > INSTALLATION |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
| 1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)
Using a heat light, heat the luggage compartment door emblem.
Remove the double-sided tape from the luggage compartment door emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the luggage compartment door emblem.
Install the luggage compartment door emblem.
Using a heat light, heat the vehicle body and luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
![]() |
Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.
| 2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the No. 7 luggage compartment door name plate. (If reusing the No. 7 luggage compartment door name plate)
Using a heat light, heat the No. 7 luggage compartment door name plate.
Remove the double-sided tape from the No. 7 luggage compartment door name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the No. 7 luggage compartment door name plate.
Install the No. 7 luggage compartment door name plate.
Using a heat light, heat the vehicle body and No. 7 luggage compartment door name plate.
Remove the release paper from the No. 7 luggage compartment door name plate.
Install the No. 7 luggage compartment door name plate as shown in the illustration.

| *1 | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement |
| A | 34.2 mm (1.35 in.) |
| B | 34.1 mm (1.34 in.) |
| C | 276.6 mm (10.89 in.) |
| 3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the No. 2 luggage compartment door name plate. (If reusing the No. 2 luggage compartment door name plate)
Using a heat light, heat the No. 2 luggage compartment door name plate.
Remove the double-sided tape from the No. 2 luggage compartment door name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the No. 2 luggage compartment door name plate.
Install the No. 2 luggage compartment door name plate.
Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
Install the No. 2 luggage compartment door name plate as shown in the illustration.

| *1 | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement |
| A | 31.1 mm (1.22 in.) |
| B | 35.7 mm (1.41 in.) |
| C | 308.3 mm (1.01 ft.) |
| 4. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the No. 1 luggage compartment door name plate. (If reusing the No. 1 luggage compartment door name plate)
Using a heat light, heat the No. 1 luggage compartment door name plate.
Remove the double-sided tape from the No. 1 luggage compartment door name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the No. 1 luggage compartment door name plate.
Install the No. 1 luggage compartment door name plate.
Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.
Remove the release paper from the No. 1 luggage compartment door name plate.
Install the No. 1 luggage compartment door name plate as shown in the illustration.

| *1 | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement |
| A | 86.0 mm (3.39 in.) |
| B | 165.0 mm (6.50 in.) |
| C | 86.0 mm (3.39 in.) |
| 5. INSTALL SIDE PANEL EMBLEM (for LH Side) |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the side panel emblem. (If reusing the side panel emblem)
Using a heat light, heat the side panel emblem.
Remove the double-sided tape from the side panel emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the side panel emblem.
Install the side panel emblem.
Using a heat light, heat the vehicle body and side panel emblem.
Remove the release paper from the side panel emblem.
Install the side panel emblem as shown in the illustration.

| *1 | Profile of Fender Panel | - | - |
| Area | Measurement |
| A | 170.0 mm (6.69 in.) |
| B | 251.0 mm (9.88 in.) |
| C | 161.0 mm (6.34 in.) |
| 6. INSTALL SIDE PANEL EMBLEM (for RH Side) |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the side panel emblem. (If reusing the side panel emblem)
Using a heat light, heat the side panel emblem.
Remove the double-sided tape from the side panel emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the side panel emblem.
Install the side panel emblem.
Using a heat light, heat the vehicle body and side panel emblem.
Remove the release paper from the side panel emblem.
Install the side panel emblem as shown in the illustration.

| *1 | Profile of Fender Panel | - | - |
| Area | Measurement |
| A | 161.0 mm (6.34 in.) |
| B | 248.0 mm (9.76 in.) |
| C | 172.0 mm (6.77 in.) |