Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ENGINE HOOD MOULDING

ENGINE HOOD MOULDING > REMOVAL

for Preparation Click here



1. REMOVE FRONT HOOD MOULDING ASSEMBLY
  1. Put protective tape around the front hood moulding assembly.



    B282049
  1. Remove the 7 nuts and remove the front hood moulding assembly.



2. REMOVE FRONT HOOD MOULDING PAD


  1. Remove the front hood moulding pad.


    B282048



3. REMOVE FRONT HOOD MOULDING PAD LH


    B283405
  1. Remove the front hood moulding pad LH.



4. REMOVE FRONT HOOD MOULDING PAD RH

HINT:
Use the same procedure as for the LH side.