Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT FENDER LINER RETAINER


    B287263
  1. Disengage the claw and remove the front fender liner retainer.

    HINT:
    Use the same procedure for the RH side and LH side.



2. REMOVE LOWER FRONT BUMPER COVER


    B287262E01
  1. Disengage the 2 claws.
    Text in Illustration 
    *1
    Hook

  1. Disengage the hook and remove the lower front bumper cover.



3. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH


    E227514
  1. Extend the headlight washer nozzle sub-assembly.

  1. Disengage the 2 claws and remove the headlight washer nozzle sub-assembly.

    HINT:
    Use the same procedure for the RH side and LH side.



4. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    E227511
  1. Slide the clip and disconnect the headlight cleaner hose.



    E234316
  1. Remove the bolt.



  1. Push the tab (A) and disengage the claw and remove the headlight washer actuator sub-assembly as shown in the illustration.


    E234317E01

    HINT:
    Use the same procedure for the RH side and LH side.



6. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



7. REMOVE HEADLIGHT CLEANER HOSE


    B292914
  1. Disengage the 5 clamps and remove the headlight cleaner hose.



8. REMOVE NO. 4 ENGINE ROOM WIRE (w/o TOYOTA Parking Assist-sensor System)


    B287260
  1. Disconnect the connector.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Disengage the clamp and remove the No. 4 engine room wire.

    HINT:
    Use the same procedure for the RH side and LH side.



9. REMOVE NO. 4 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    B292913
  1. Disconnect the 2 connectors.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Disengage the clamp and remove the No. 4 engine room wire.

    HINT:
    Use the same procedure for the RH side and LH side.



10. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)


    E228021E01
  1. Disconnect the connector.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



    E228019E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



11. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    E228020E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



12. REMOVE FOG LIGHT ASSEMBLY LH
  1. Disconnect the connector.



    E228341
  1. Remove the screw.

  1. Disengage the 2 guides and remove the fog light assembly.



13. REMOVE FOG LIGHT ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



14. REMOVE FRONT BUMPER HOLE COVER LH


    B287264
  1. Disengage the 6 claws and remove the front bumper hole cover LH.



15. REMOVE FRONT BUMPER HOLE COVER RH

HINT:
Use the same procedure as for the LH side.



16. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    B287269
  1. Disengage the 10 claws and remove the radiator grille sub-assembly.



17. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    B287267
  1. Remove the 2 screws.

  1. Disengage the 4 claws and 2 guides to remove the radiator grille emblem assembly.



18. REMOVE NO. 1 LOWER RADIATOR GRILLE


    B287268
  1. Disengage the 16 claws and 2 guides, and remove the No. 1 lower radiator grille.



19. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    B287265
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the front bumper extension mounting bracket.



20. REMOVE FRONT BUMPER ENERGY ABSORBER


    B287261
  1. Disengage the 2 guides and remove the front bumper energy absorber.



21. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    B287259
  1. Disengage the 5 clamps.

  1. Remove the 6 bolts and front bumper reinforcement sub-assembly.



22. REMOVE FRONT BUMPER SIDE RETAINER LH


    B281875
  1. Remove the bolt and screw.

  1. Disengage the 2 claws and remove the front bumper side retainer LH.



23. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.