FRONT BUMPER > DISASSEMBLY |
| 1. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
![]() |
Extend the headlight washer actuator sub-assembly.
Disengage the claw to remove the headlight washer nozzle sub-assembly.
| 2. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH |
| 3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
![]() |
Disconnect the headlight cleaner hose.
![]() |
Remove the headlight cleaner clamp as shown in the illustration.
![]() |
Pull the headlight cleaner actuator clamp as shown in the illustration.
While pushing the tab indicated by the arrow (A), disengage the claw and guide to remove the headlight washer actuator sub-assembly as shown in the illustration.

| 4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH |
| 5. REMOVE HEADLIGHT CLEANER HOSE |
![]() |
Disengage the 8 clamps to remove the headlight cleaner hose.
| 6. REMOVE NO. 1 ULTRASONIC SENSOR |
![]() |
Disconnect the connector.
![]() |
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
| 7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER |
![]() |
Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.
| 8. REMOVE FOG LIGHT ASSEMBLY LH |
Disconnect the connector.
![]() |
Remove the screw.
Disengage the 2 guides and remove the fog light assembly.
| 9. REMOVE FOG LIGHT ASSEMBLY RH |
| 10. REMOVE NO. 4 ENGINE ROOM WIRE |
![]() |
Disengage the clamp to remove the No. 4 engine room wire.
| 11. REMOVE FRONT FENDER LINER RETAINER |
![]() |
Disengage the claw to remove the front fender liner retainer.
| 12. REMOVE NO. 2 RADIATOR GRILLE BRACKET |
![]() |
Remove the 2 screws.
Disengage the guide to remove the No. 2 radiator grille bracket.
| 13. REMOVE RADIATOR GRILLE SUB-ASSEMBLY |
![]() |
Remove the 2 clips.
Disengage the 8 claws and remove the radiator grille sub-assembly.
| 14. REMOVE UPPER RADIATOR GRILLE MOULDING LH |
![]() |
Remove the screw.
Disengage the 3 claws and remove the upper radiator grille moulding LH.
| 15. REMOVE UPPER RADIATOR GRILLE MOULDING RH |
| 16. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the 4 claws and 2 guides to remove the radiator grille emblem assembly.
| 17. REMOVE RADIATOR GRILLE BRACKET |
![]() |
Remove the clip.
Disengage the guide to remove the radiator grille bracket.
| 18. REMOVE FRONT BUMPER HOLE COVER LH |
![]() |
Disengage the 6 claws to remove the front bumper hole cover LH.
| 19. REMOVE FRONT BUMPER HOLE COVER RH |
| 20. REMOVE LOWER FRONT BUMPER COVER |
![]() |
Disengage the 4 claws.
| *a | Hook |
Disengage the hook and remove the lower front bumper cover.
| 21. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY |
Remove the 4 screws.

Disengage the 24 claws and remove the lower radiator grille sub-assembly from the front bumper cover.

| 22. REMOVE FRONT BUMPER ENERGY ABSORBER |
![]() |
Disengage the 2 guides to remove the front bumper energy absorber.
| 23. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() |
Disengage the 5 clamps.
Remove the 6 bolts and front bumper reinforcement sub-assembly.
| 24. REMOVE FRONT BUMPER SIDE RETAINER LH |
![]() |
Remove the bolt and screw.
Disengage the 2 claws and remove the front bumper side retainer LH.
| 25. REMOVE FRONT BUMPER SIDE RETAINER RH |