REAR BUMPER > DISASSEMBLY |
| 1. REMOVE REAR BUMPER PAD LH |
![]() |
Remove the rear bumper pad LH.
![]() | Double-sided Tape |
| 2. REMOVE REAR BUMPER PAD RH |
![]() |
Remove the rear bumper pad RH.
![]() | Double-sided Tape |
| 3. REMOVE REFLEX REFLECTOR ASSEMBLY LH |
![]() |
Remove the screw.
Disengage the guide to remove the reflex reflector assembly LH.
| 4. REMOVE REFLEX REFLECTOR ASSEMBLY RH |
| 5. REMOVE NO. 2 LUGGAGE ROOM WIRE |
![]() |
Disengage the clamp.
Disconnect the connector to remove the No. 2 luggage room wire.
| 6. REMOVE ULTRASONIC SENSOR CLIP |
![]() |
Disengage the 4 claws to remove the ultrasonic sensor clip.
| 7. REMOVE NO. 1 ULTRASONIC SENSOR |
![]() |
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
| 8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER |
![]() |
Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.
| 9. REMOVE REAR BUMPER BAR |
Remove the 2 screws.

Disengage the 6 claws to remove the rear bumper bar.

| 10. REMOVE LOWER REAR BUMPER COVER |
Remove the 8 outside moulding retainers.

Disengage the 8 guides to remove the lower rear bumper cover from the rear bumper cover.
| 11. REMOVE REAR BUMPER SIDE RETAINER LH |
![]() |
Remove the 3 screws.
Disengage the 6 claws and remove the rear bumper side retainer LH.
| 12. REMOVE REAR BUMPER SIDE RETAINER RH |
| 13. REMOVE WHEEL HOUSE REINFORCEMENT LH |
![]() |
Remove the screw and nut.
Disengage the clip to remove the wheel house reinforcement LH.
| 14. REMOVE WHEEL HOUSE REINFORCEMENT RH |
| 15. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() |
Remove the 6 nuts and rear bumper reinforcement sub-assembly.