Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH

VSC OFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL VEHICLE STABILITY CONTROL SWITCH (for LHD)


    C268163
  1. Engage the 2 claws to install the vehicle stability control switch.



2. INSTALL VEHICLE STABILITY CONTROL SWITCH (for RHD)


    C268164
  1. Engage the 2 claws to install the vehicle stability control switch.



3. INSTALL NO. 1 SWITCH HOLE BASE


    E235170
  1. Connect the connector.

  1. Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  1. Remove the protective tape from the panel.