Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE SONAR MAIN SWITCH

CLEARANCE SONAR MAIN SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY
  1. Engage the 2 claws to install the back sonar or clearance sonar switch assembly.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B386776
  1. Temporarily install the instrument cluster finish panel assembly as shown in the illustration.

  1. Connect each connector.

  1. for LHD:

    1. Engage the 3 claws, 7 clips and 4 guides.

  1. for RHD:

    1. Engage the 4 claws, 5 clips and 4 guides.



    B384403
  1. Engage the 4 clips and 2 guides to install the instrument cluster finish panel assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B280325
  1. Engage the 4 clips to install the No. 1 instrument panel register assembly.



4. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)
  1. Connect the connector.



    B287369
  1. Engage the 2 claws and 4 clips to install the upper instrument panel finish panel.



5. INSTALL INSTRUMENT SIDE PANEL


    B293646
  1. Engage the 3 guides.



    B280321
  1. Engage the 4 claws to install the instrument side panel LH as shown in the illustration.



6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD:
for RHD:


7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for RHD)


8. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for RHD)
  1. Engage the claw to connect the luggage trim service hole cover.