ELECTRICAL KEY OSCILLATOR (for Center Floor) > INSTALLATION |
| 1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY |
Install the No. 2 indoor electrical key antenna assembly with the 2 bolts.
Connect the connector.
| 2. INSTALL REAR SEAT CUSHION LOCK HOOK |
![]() |
Engage the claw to install a new rear seat cushion lock hook.
| 3. INSTALL REAR SEAT CUSHION ASSEMBLY |
Place the rear seat cushion assembly in the cabin.
![]() |
Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.
Confirm that the rear seat cushion assembly is firmly installed.