LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH > INSTALLATION |
| 1. INSTALL BACK DOOR GARNISH MOULDING PROTECTOR LH |
Clean the luggage compartment door outside garnish sub-assembly.
Remove any double-sided tape from the luggage compartment door outside garnish sub-assembly.
Wipe off any tape adhesive residue with cleaner.
Install a new back door garnish moulding protector LH.
Remove the release paper from the back door garnish moulding protector LH.
![]() |
Install a new back door garnish moulding protector LH as shown in the illustration.
| Dimension | Measurement |
| A | 1.5 mm (0.0591 in.) |
| 2. INSTALL BACK DOOR GARNISH MOULDING PROTECTOR RH |
| 3. INSTALL UPPER BACK DOOR GARNISH MOULDING PROTECTOR |
Clean the luggage compartment door outside garnish sub-assembly.
Remove any double-sided tape from the luggage compartment door outside garnish sub-assembly.
Wipe off any tape adhesive residue with cleaner.
Install a new upper back door garnish moulding protector.
Remove the release paper from the upper back door garnish moulding protector.
Install a new upper back door garnish moulding protector.
| 4. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)
Using a heat light, heat the luggage compartment door emblem.
Remove the double-sided tape from the luggage compartment door emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the luggage compartment door emblem.
Install the luggage compartment door emblem.
Using a heat light, heat the vehicle body and luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
![]() |
Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.
| 5. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY |
Install the luggage door opening switch assembly.
| 6. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Install 5 new gaskets to the luggage compartment door outside garnish sub-assembly.
Install a new clip (back door outside garnish clip) and 2 new clips to the luggage compartment door outside garnish sub-assembly.
![]() |
Engage the 3 clips to install the luggage compartment door outside garnish sub-assembly.
| *1 | Back Door Outside Garnish Clip |
Install the 5 nuts.
Connect each connector.
| 7. INSTALL REAR LIGHT ASSEMBLY LH |
![]() |
Install the rear light assembly with the 4 nuts.
Engage the clamp.
Connect the connector.
| 8. INSTALL REAR LIGHT ASSEMBLY RH |
| 9. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Install the luggage compartment door cover with the 13 clips.