FRONT DOOR COURTESY SWITCH > INSTALLATION |
| 1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY |
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.
Connect the connector.
| 2. INSTALL CENTER PILLAR LOWER GARNISH |
Engage the 2 claws and 3 clips to install the center pillar lower garnish LH.
| 3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP |
| 4. INSTALL REAR DOOR SCUFF PLATE |
Engage the 6 claws to install the rear door scuff plate LH.
| 5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 6. INSTALL FRONT DOOR SCUFF PLATE |
Engage the 10 claws to install the front door scuff plate LH.