SIDE TURN SIGNAL LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY |
Connect the connector.
Engage the 2 claws to install the side turn signal light assembly.
| 2. INSTALL OUTER MIRROR COVER |
Engage the 7 claws to install the outer mirror cover.
Connect the 2 connectors.
Engage the clamp.
Install the mirror actuator with the 3 screws.
| 3. INSTALL OUTER MIRROR |
Connect the 2 connectors.
![]() |
Engage the 2 guides on the upper part of the outer mirror to the outer mirror.
![]() |
Engage the 2 claws on the lower part of the outer mirror to the outer mirror.