Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE REAR BUMPER ASSEMBLY
(Click here)


2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
  1. Remove the luggage compartment floor mat.



3. REMOVE BAGGAGE HOLDER NET
  1. Remove the baggage holder net.



4. REMOVE REAR FLOOR FINISH PLATE


    B287038
  1. Remove the 5 clips.



    B287039
  1. Disengage the 4 clips and remove the rear floor finish plate.



5. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER


    B287041
  1. Disengage the 8 fasteners.

  1. Disengage the 2 claws and remove the luggage compartment front trim cover.



6. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B288530E01
  1. Push the pin and remove the No. 1 luggage compartment trim hook.
    Text in Illustration 
    *1
    Pin



7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    B287042
  1. Remove the 3 clips.

  1. Disengage the fastener and remove the luggage compartment inner trim cover LH.



8. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    E226763
  1. Disconnect each connector.

  1. Disengage the clamp.



    E226764
  1. Remove the 4 nuts and rear combination light assembly.