Home › Vehicle Exterior › WIPER / WASHER › WIPER ECU

WIPER ECU > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY
  1. Install the windshield wiper relay assembly with the nut.

  1. Connect the connector.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B281770
  1. Engage the 2 clips and 4 guides.

  1. Install the 3 screws <C>.

  1. Close the lower instrument panel door.

  1. Install the lower instrument panel sub-assembly with the bolt <B> and screw <C>.



3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Connect the connector.

  1. Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.



4. INSTALL INSTRUMENT SIDE PANEL


    B281766
  1. Engage the 3 guides as shown in the illustration.



    B281764
  1. Engage the 4 claws to install the instrument side panel RH as shown in the illustration.



5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD :
for RHD :


6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY

HINT:
Use the same procedure as for the LH side .



7. INSTALL FRONT DOOR SCUFF PLATE

HINT:
Use the same procedure as for the LH side .



8. INSTALL FRONT PANEL GARNISH


    B280333
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.