HIGH INTENSITY DISCHARGE HEADLIGHT BULB > ON-VEHICLE INSPECTION |
| 1. INSPECT DISCHARGE HEADLIGHT BULB |
Prepare the vehicle:
Before performing the following inspection procedure, turn off the discharge headlight bulbs for more than 10 minutes to allow them to cool down sufficiently.
Turn on the discharge headlights for more than 25 minutes, and check that the bulbs illuminate normally when they are turned on.
Repeatedly turn the discharge headlights off for 15 seconds and on for 15 seconds (5 times for each). Check that the bulbs illuminate normally.
Turn off the discharge headlights for 3 minutes, and then turn on the discharge headlights for 3 minutes. Check that the bulbs illuminate normally when they are turned on.

Remove the discharge headlight bulb and perform a visual inspection of the arc tube.

| *A | Discharge Headlight Bulb is Normal | *B | Discharge Headlight Bulb at End of Usable Life |
| *1 | Arc Tube | - | - |
![]() | Inside of Arc Tube | ![]() | Distortion / Clouded Area |