Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER

COMBINATION METER > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY
  1. Connect the 2 connectors.

  1. Engage the wire harness clamp.

  1. Install the combination meter assembly with the 4 screws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B280330
  1. Temporarily install the instrument cluster finish panel assembly as shown in the illustration.

  1. Connect each connector.

  1. for LHD:

    1. Engage the 3 claws, 7 clips and 4 guides.

  1. for RHD:

    1. Engage the 4 claws, 5 clips and 4 guides.



    B283375
  1. Engage the 4 clips and 2 guides to install the instrument cluster finish panel assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B280325
  1. Engage the 4 clips to install the No. 1 instrument panel register assembly.



4. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)
  1. Connect the connector.



    B287369
  1. Engage the 2 claws and 4 clips to install the upper instrument panel finish panel.



5. INSTALL INSTRUMENT SIDE PANEL


    B293646
  1. Engage the 3 guides.



    B280321
  1. Engage the 4 claws to install the instrument side panel LH as shown in the illustration.



6. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
for LHD :
for RHD :


7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


8. INSTALL LUGGAGE TRIM SERVICE HOLE COVER
  1. Engage the claw to connect the luggage trim service hole cover.