FRONT CONSOLE BOX > REASSEMBLY |
| 1. INSTALL CONSOLE COMPARTMENT DOOR CUSHION |
![]() |
Install the 4 console compartment door cushions to the console compartment door lock sub-assembly.
![]() |
Engage the 2 guides and temporarily install the console compartment door lock sub-assembly as shown in the illustration.
![]() |
Engage the 8 claws.
![]() |
Install the console compartment door lock sub-assembly with the 2 screws.
| 2. INSTALL REAR CONSOLE ARMREST ASSEMBLY |
Temporarily install the rear console armrest assembly.
![]() |
Push in the box door hinge shafts by hand as far as possible.
![]() |
Using pliers, push in the box door hinge shafts completely.
| *1 | Protective Tape |
![]() |
Install the rear console armrest assembly with the 2 E-rings.
| 3. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY |
![]() |
Engage the 4 claws and 4 clips to install the console rear end panel sub-assembly.