Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER

CLEARANCE WARNING BUZZER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 CLEARANCE WARNING BUZZER
  1. Engage the clamp to install the No. 1 clearance warning buzzer.

  1. Connect the connector.



2. INSTALL FRONT ASH RECEPTACLE ASSEMBLY
  1. Connect each connector.



    B281756
  1. Engage the 2 clips.

  1. Install the front ash receptacle assembly with the 2 screws <C>.



3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. Connect each connector.



    B292379
  1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



4. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B280334
  1. Engage the 6 clips to install the rear console upper panel sub-assembly.

  1. Move the shift lever to P.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B281912
  1. Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.



6. INSTALL FRONT PANEL GARNISH RH


    B280333
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



7. INSTALL FRONT PANEL GARNISH LH


    B281945
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.