Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER

CLEARANCE WARNING BUZZER > REMOVAL

for Preparation Click here



1. REMOVE FRONT PANEL GARNISH LH


    B280331
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.



2. REMOVE FRONT PANEL GARNISH RH


    B280332
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish RH as shown in the illustration.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B281911
  1. Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.



4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Move the shift lever to N.



  1. Disengage the 6 clips as shown in the illustration.


    B280335

  1. Disconnect each connector to remove the rear console upper panel sub-assembly.



5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    B292378
  1. Disengage the 2 claws as shown in the illustration.

  1. Disconnect each connector to remove the front console upper panel garnish.



6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY


    B281754
  1. Remove the 2 screws <C>.



    B281755
  1. Disengage the 2 clips as shown in the illustration.

  1. Disconnect each connector to remove the front ash receptacle assembly.



7. REMOVE NO. 1 CLEARANCE WARNING BUZZER


    E223731
  1. Disconnect the connector.

  1. Disengage the clamp to remove the No. 1 clearance warning buzzer.