CLEARANCE WARNING BUZZER > REMOVAL |
| 1. REMOVE FRONT PANEL GARNISH LH |
![]() |
Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.
| 2. REMOVE FRONT PANEL GARNISH RH |
![]() |
Disengage the 3 clips and 8 guides to remove the front panel garnish RH as shown in the illustration.
| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Disengage the 2 claws and disconnect the shift hole cover sub-assembly as shown in the illustration.
![]() |
Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.
| 4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Move the shift lever to N.
Disengage the 6 clips as shown in the illustration.

Disconnect each connector to remove the rear console upper panel sub-assembly.
| 5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH |
![]() |
Disengage the 2 claws as shown in the illustration.
Disconnect each connector to remove the front console upper panel garnish.
| 6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY |
![]() |
Remove the 2 screws <C>.
![]() |
Disengage the 2 clips as shown in the illustration.
Disconnect each connector to remove the front ash receptacle assembly.
| 7. REMOVE NO. 1 CLEARANCE WARNING BUZZER |
![]() |
Disconnect the connector.
Disengage the clamp to remove the No. 1 clearance warning buzzer.