Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU

CLEARANCE WARNING ECU > INSTALLATION

for Preparation Click here



1. INSTALL CLEARANCE WARNING ECU ASSEMBLY
  1. Engage the 2 claws to install the clearance warning ECU assembly.



2. INSTALL ECU INTEGRATION BOX RH
  1. Install the ECU integration box RH with the 2 nuts and bolt.

    Torque:
    Bolt:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
    Nut:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect each connector.



3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

HINT:
Use the same procedure as for the LHD .



4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

HINT:
Use the same procedure as for the LHD .



5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL
  1. Connect the connector.



    B287369
  1. Engage the 2 claws and 4 clips to install the upper instrument panel finish panel.



6. INSTALL FRONT PANEL GARNISH RH


    B280333
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



7. INSTALL INSTRUMENT SIDE PANEL RH


    B281766
  1. Engage the 3 guides as shown in the illustration.



    B281764
  1. Engage the 4 claws to install the instrument side panel RH as shown in the illustration.



8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    B278981E01
  1. Align the alignment mark (White) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip RH.
    Text in Illustration 
    *1
    Alignment Mark (White)

    NOTICE:
    After installation, check that the corners fit correctly.



9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side .



10. INSTALL FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side .



11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER
  1. Engage the claw to connect the luggage trim service hole cover.