Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR SUNSHADE SWITCH

REAR SUNSHADE SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL REAR SUNSHADE SWITCH ASSEMBLY
  1. Engage the 2 claws to install the rear sunshade switch assembly.



2. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. Connect each connector.



    B384415
  1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



3. INSTALL FRONT PANEL GARNISH LH


    B386759
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.



4. INSTALL FRONT PANEL GARNISH RH


    B384417
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.