Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › COMBINATION SWITCH

COMBINATION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL EV DRIVE MODE SWITCH
  1. Engage the 2 claws to install the EV drive mode switch.



2. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. Connect each connector.



    B292379
  1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



3. INSTALL FRONT PANEL GARNISH LH


    B281945
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.



4. INSTALL FRONT PANEL GARNISH RH


    B280333
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.