Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › COMBINATION SWITCH

COMBINATION SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT PANEL GARNISH LH


    B384406
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.



2. REMOVE FRONT PANEL GARNISH RH


    B384409
  1. Disengage the 3 clips and 8 guides to remove the front panel garnish RH as shown in the illustration.



3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    B384411
  1. Disengage the 2 claws as shown in the illustration.

  1. Disconnect each connector to remove the front console upper panel garnish.



4. REMOVE EV DRIVE MODE SWITCH


    A332127
  1. Disengage the 2 claws and remove the EV drive mode switch from the front console upper panel garnish.