LUMBAR SWITCH > INSTALLATION |
| 1. INSTALL FRONT LUMBAR POWER SEAT SWITCH |
Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.
| 2. INSTALL FRONT SEAT CUSHION SHIELD |
Connect the front lumbar power seat switch connector.
Connect the front power seat switch connector.
Engage the 2 wire harness clamps.
Install the wire harness to the wire harness cover.
Engage the 2 claws to close the wire harness cover.
Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.
| 3. INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD |
![]() |
Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.
![]() |
Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.
Install the screw.
| 4. CONNECT SEPARATE TYPE FRONT SEATBACK COVER |
Connect the rubber band of the separate type front seatback cover.
| 5. INSTALL FRONT SEAT ASSEMBLY |