Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the intelligent tester

    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Door Lock.

    5. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Unlock Key Twice
      OFF
      Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Auto Lock
      ON
      Function that locks all doors when the vehicle speed reaches a certain level.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Auto Lock/Shift
      OFF
      Function that locks all doors when the shift lever is moved out of P with the power switch on (IG) and all doors closed.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Auto Unlock/Shift
      OFF
      Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG).
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      All Unlock/Open-Close
      OFF
      Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off.
      OFF or ON
      Main body ECU (Multiplex network body ECU)

  1. Customizing with the Multi-display (w/ Audio and Visual System (for Radio and Display Type))

    1. Turn the power switch on (IG).

    2. Enter the following menus: SETUP / Vehicle.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Speed sensitive auto lock
      On
      Function that locks all doors when the vehicle speed reaches a certain level.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Shift-linked auto lock
      Off
      Function that locks all doors when the shift lever is moved out of P with the power switch on (IG) and all doors closed.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Shift-linked auto unlock
      Off
      Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG).
      On or Off
      Main body ECU (Multiplex network body ECU)