METER / GAUGE SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE METER / GAUGE SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Combination Meter / Warning.
Select the setting by referring to the table below.
| Tester Display | Default | Content | Setting | Relevant ECU |
| Key Remind Sound | Slow | Function to change the cycle of the key remind warning buzzer | Normal, Slow, Fast | Combination meter assembly |
| Driver Side Seatbelt Warning Buzzer*1 | ON | Function to turn on/off the seat belt warning buzzer | ON or OFF | Combination meter assembly |
| Lane Change Flashing Times Setting | 3 | Function to change the lane change flashing time | OFF, 3, 4, 5, 6, 7 | Combination meter assembly |
Customizing with the combination meter assembly
Turn the power switch on (IG).
Select the following menus: SETTINGS.
Select the setting by referring to the table below.
| Combination Meter Assembly Display | Default | Content | Setting | Relevant ECU |
| LANGUAGE | ENGLISH | Function to change the multi-information display language | ENGLISH, FRENCH, SPANISH | Combination meter assembly |
| ECO INDICATOR | ON | Function to display/not display the eco indicator and current fuel economy display | ON or OFF | Combination meter assembly |
| EV INDICATOR | ON | Function to display/not display the EV indicator | ON or OFF | Combination meter assembly |
Press and hold the DISP switch.
Return to the item selection screen.