AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE AIR CONDITIONING SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Air Conditioner / Utility / Customize.
Select the setting by referring to the table below.
| Tester Display | Default | Content | Setting | Relevant ECU |
| Set Temperature Shift | Normal | Function to perform control with the shifted temperature versus the displayed temperature | -2C, -1C, Normal, +1C, +2C | Air Conditioning Amplifier Assembly |
| Compressor Mode | Automatic | Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF | Automatic or Manual | Air Conditioning Amplifier Assembly |
| Air Inlet Mode | Automatic | In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode | Automatic or Manual | Air Conditioning Amplifier Assembly |
| Foot/DEF Auto Mode | ON | Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON | ON or OFF | Air Conditioning Amplifier Assembly |
| Foot/DEF Automatic Blow Up Function | ON | Function to increase the blower level automatically when the defroster is ON | ON or OFF | Air Conditioning Amplifier Assembly |
| Ambient Temperature Shift | Normal | Function to display shifted ambient temperature versus actual ambient temperature | -3C, -2C, -1C, Normal, +1C, +2C, +3C | Air Conditioning Amplifier Assembly |
| ECO MODE Cancel | OFF | Function to cancel the ECO mode drive when item is on | OFF or ON | Air conditioning amplifier assembly |
| Noise and Vibration Reduction | OFF | Function to change speed of the compressor when item is on | OFF or ON | Air conditioning amplifier assembly |
| Refrigerant Shortage Check | ON | Function to cancel the refrigerant shortage check (check performed during normal operation) when item is OFF | ON or OFF | Air Conditioning Amplifier Assembly |
| Fan speed increment control | Normal | Function to define how fast the AC blower goes to target speed when first activating the AC | Slow, Normal, Fast | Air Conditioning Amplifier Assembly |
| Ion Generate Control | ON | Function to generate ions is stopped when item is OFF | ON or OFF | Air Conditioning Amplifier Assembly |
| Air Inlet Damper Mode | Normal | Function to forcibly set the air inlet to FRESH AIR mode | Normal or Compulsion | Air Conditioning Amplifier Assembly |
| Outside Air Mode Auto Switch Function* | ON | Function to automatically change the air inlet to FRESH mode when the vehicle is parked | ON or OFF | Air Conditioning Amplifier Assembly |
Customizing using the multi-display
Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle customization / Climate settings.
Select the setting by referring to the table below:
| Display | Default | Content | Setting | Relevant ECU |
| Auto A/C Mode | On | Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off | On or Off | Air Conditioning Amplifier Assembly |
| Efficient Ventilation Mode | On | In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode | On or Off | Air Conditioning Amplifier Assembly |