Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY HORN ASSEMBLY

SECURITY HORN ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
  1. Remove the luggage compartment floor mat.



2. REMOVE BAGGAGE HOLDER NET
  1. Remove the baggage holder net.



3. REMOVE REAR FLOOR FINISH PLATE


    B287038
  1. Remove the 5 clips.



    B287039
  1. Disengage the 4 clips and remove the rear floor finish plate.



4. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER


    B287041
  1. Disengage the 8 fasteners.

  1. Disengage the 2 claws and remove the luggage compartment front trim cover.



5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B287040E01
  1. Push the 2 pins and remove the 2 No. 1 luggage compartment trim hooks.
    Text in Illustration 
    *1
    Pin



6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    B287043
  1. Remove the 3 clips.

  1. Disengage the fastener and remove the luggage compartment inner trim cover RH.



7. REMOVE SECURITY HORN ASSEMBLY


    B289696
  1. Remove the 2 nuts.

  1. Disconnect the connector and remove the security horn assembly.